Replacement Battery for Garmin DC40 and DC30

Replacement Battery for Garmin DC40 and DC30

Availability Out of stock

Quick Overview

Replacement Battery for Garmin DC40 and DC30

DC30 requires the use of the factory mounting plate

  • Buy 5 for $39.00 each and save 2%
  • Buy 10 for $38.00 each and save 5%
  • Buy 20 for $37.00 each and save 7%

Quick Overview

Keep your DC 40/DC30 dog-tracking collar charged during extended training with this lithium-ion battery pack.  This is a replacement lithium ion battery for the Garmin Dc40 tracking collar, below are instructions for replaceing your dc40 battery at home,

Changing the Battery in a DC40 Collar

1: Using a Phillips screwdriver remove the two screws and back plate and collar.

2: Using a small Phillips screwdriver remove all small screws from around the back of the collar box and remove.Carefully unplug battery from board and   charging wires, do not pull on wires .(please note how the battery is set in bottom of collar box, you will need to place new battery in same position)

3: Using small Phillips screwdriver remove the plate holding battery in place and remove battery.

4: Place new battery in collar box in same position as the old battery. (wired end on same end as power button)

5: Re-attach plate over battery.

6: Connect battery plugs to collar.

7: Ensure proper connection by pressing the white power button on circuit board.

8: Re-attach back of collar box and use small Phillips screwdriver to screw it back together (make sure all black screws are screwed down to avoid water leakage)

9: Re-attach collar and back plate.

10: Fully charge your dc40 collar before use.


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Need help checking out? Give us a call!