Pro 550+ Help & Troubleshooting

Considering recent worldwide shipping and manufacturing backlogs with some items stretching out months at a time, many hunters with smaller or younger dogs are left wondering what their options are. Here are some of the FAQs we get when customers inquire about the full-sized T5 and TT15 collar vs. the T5 and TT15 mini: Q: "If TT15 minis are unavailable...

You will first need to make the rotary dial is set to the "N" position.  -Press the dedicated "Tone" button -Press the lower stimulation button to Calibrate the compass -Follow directions on display and rotate the Pro 550 + in a figure 8 motion Once the compass has successfully calibrated you will see a check mark on the display verifying...

To turn the Tracer lights of your TT15 or T5 collar you will first need to make sure it has been paired with your Garmin Pro 550 +. Both units must be turned on and have connection to each other.  -Using the "Dog Selector" switch (upper switch), select desired collar to turn Tracer lights on or off. -Place "Function" switch...

You can activate the Garmin Pro 550 + Back-lite by simple short pressing the power button located on the right side of the handheld near the top. (near the base of the antenna).  You can also turn the Back-light off by simply short pressing the power button again.   Note: if you hold down the power button instead of a...

To "tone" a collar you will first need to use the upper selector switch and set it to the desired dog. (Black, Red or Blue selector) Then press the upper dedicated "tone" button to correct selected dog.  

First you will need to set the rotary dial on top of the unit to "N" or  "neutral" position. Follow the steps below to program your TT15, TT15 mini, T5 or T5 mini to the Pro 550 + -Place upper selector switch in the desired position for the collar you are adding -Press the dedicated "tone" button above upper selector...

Press the Dog button twice on your Astro 320 to get to Dog List, select the collar you wish to change the rescue mode on. Next select show info and this will bring up the info page.    Next hit the Menu button and select Rescue Mode.    Select On or Off, you will then get the communicating with dog...

Press the DOG button twice on your Astro 320, Next select the DC50 collar you wish to change the update rate on. Next select Show Info. This will bring up you info page of the collar you have selected.    On the 320 Press the menu button and select Comm. Settings. Once Comm. Settings is selected, the device will ask...