Mini GPS Replacement Collar Strap – 28" x 3/4" Sunglo D-Ring

Replace a worn, damaged, faded, or broken strap on your Mini GPS tracking or training collar with our 28" x 3/4" Mini Sunglo D-Ring replacement collar strap.

The narrower 3/4" design is ideal for Mini GPS collar configurations and smaller hunting dogs where a full-size 1" strap can be wider than necessary.

At Double U Hunting Supply, Mini GPS equipment has always been especially important for hunters running Beagles, Feists, smaller hounds, and other small dogs. This replacement strap gives you an inexpensive way to replace an old or damaged collar strap without replacing a GPS collar that's still working well.

Fits Garmin Mini GPS Collars

This 3/4" replacement strap is a great choice for compatible Mini GPS collar configurations, including:

• Garmin TT25 configured with a Mini / Zero-Length Flex Band
• Garmin TT15 Mini
• Garmin T5 Mini
• Other compatible GPS and training collars designed to use a 3/4" strap

The newer Garmin TT25 makes it much easier to configure the collar for different-sized dogs. Pairing the TT25 with the Mini / Zero-Length GPS Flex Band and this narrower 3/4" strap can help create a better-fitting configuration for smaller dogs.

Mini 3/4" vs. Full Size 1" – Which Strap Do I Need?

This product is the Mini 3/4" wide replacement strap.

For smaller dogs and compatible Mini GPS collar configurations, the narrower 3/4" strap helps reduce unnecessary collar width around the dog's neck.

If you're replacing the strap on a standard Full Size GPS collar, we also offer our Full Size 1" GPS Replacement Collar Strap as a separate product.

[Shop the Full Size 1" GPS Replacement Collar Strap]

If you're unsure which width you currently have, measure the width of your existing strap or give Double U a call before ordering.

28" Long – Fit First, Then Trim

This Mini strap measures approximately 28 inches long by 3/4 inch wide.

The extra length allows you to install the strap through your GPS collar, adjust the complete collar properly to your dog, and then trim off the excess material.

Because GPS housings and other components take up space on the strap, the final fit can vary depending on the particular GPS collar and dog.

Always fit the complete GPS collar to your dog before cutting the strap.

Great for Smaller Hunting Dogs

A narrower collar strap can make a noticeable difference on smaller dogs.

The 3/4" width is especially useful for Beagles, Feists, puppies, smaller hounds, and other small-necked dogs where a standard 1" strap may feel unnecessarily wide.

The goal isn't simply to use the smallest collar possible. It's to build a GPS collar configuration that fits the dog correctly while still keeping the tracking equipment secure.

Large Selection of Colors

Choose from a large selection of standard, bright, reflective, and camo colors.

Different colors make it easier to identify dogs and GPS collars when you're running multiple dogs, and replacing the strap is also an inexpensive way to freshen up an older Garmin collar.

Actual colors may appear slightly different depending on your screen or monitor settings.

• FREE Personalized Brass Nameplate
• Each Mini replacement strap includes a FREE stamped brass nameplate with take-home rivets.
• Your nameplate can include up to 4 lines of text.
• Available characters include A through Z, 0 through 9, hyphen (-), period (.), and comma (,).
• We cannot stamp email addresses or most special characters.
• If you're ordering multiple straps and need different information on each nameplate, leave us a note in your shopping cart or order each collar color separately.

GPS Collar Users – Install the Nameplate After Fitting the Collar

For GPS collars, we recommend having the nameplate shipped loose rather than permanently attached before we ship the strap.

Unlike a regular O-ring collar, the GPS device and other components take up space on the strap. The exact location of the GPS unit, buckle, D-ring, adjustment holes, and nameplate all affect the final fit.

Installing the nameplate before fitting the strap to your particular GPS collar and dog can put the plate or rivets where they interfere with proper adjustment.

That's why we include the nameplate with take-home rivets.

For the best fit:

1. Install the new strap through your GPS collar.
2. Fit and adjust the complete collar on your dog.
3. Find a location for the nameplate that doesn't interfere with the GPS equipment or adjustment.
4. Attach the included nameplate with the supplied rivets.
5. Trim the excess strap only after you're satisfied with the final fit.

Fit first, attach the nameplate second, and trim the strap last.

Need Help Choosing Between Mini and Full Size?

If you're replacing the strap on a Garmin TT15 Mini or T5 Mini, or building a smaller TT25 configuration, this 3/4" strap is likely the version you're looking for.

Not sure? Call Double U Hunting Supply at 855-384-8687 and we'll help you figure out which strap fits your GPS collar and dog.