Jason Duby

  1. How to: Calibrate the Compass on the Garmin Pro 550 +

    You will first need to make the rotary dial is set to the "N" position.  -Press the dedicated "Tone" button -Press the lower stimulation button to Calibrate the compass -Follow directions on display and rotate the Pro 550 + in a figure 8 motion Once the compass has successfully calibrated you will see a check mark on the display verifying...
  2. How to: Turn Collar Tracer Lights on and off with the Garmin Pro 550 +

    To turn the Tracer lights of your TT15 or T5 collar you will first need to make sure it has been paired with your Garmin Pro 550 +. Both units must be turned on and have connection to each other.  -Using the "Dog Selector" switch (upper switch), select desired collar to turn Tracer lights on or off. -Place "Function" switch...
  3. How to: Turn the Pro 550 + Back-light on

    You can activate the Garmin Pro 550 + Back-lite by simple short pressing the power button located on the right side of the handheld near the top. (near the base of the antenna).  You can also turn the Back-light off by simply short pressing the power button again.   Note: if you hold down the power button instead of a...
  4. How to:Tone a Collar with the Pro 550 +

    To "tone" a collar you will first need to use the upper selector switch and set it to the desired dog. (Black, Red or Blue selector) Then press the upper dedicated "tone" button to correct selected dog.  
  5. How to Pair a Collar to the Pro 550+

    First you will need to set the rotary dial on top of the unit to "N" or  "neutral" position. Follow the steps below to program your TT15, TT15 mini, T5 or T5 mini to the Pro 550 + -Place upper selector switch in the desired position for the collar you are adding -Press the dedicated "tone" button above upper selector...
  6. How to: Add a Contact to my Garmin Astro 430

    To add an Alpha 100 to your contacts list make sure both units are on and within range. From the home screen of your Astro 430 follow the steps below. Select "Tools" Scroll all the way down and Select "Contacts" Select "Add" Select "Pair" on the Alpha 100 handheld (if you need further instructions to find your contacts icon please...
  7. How To: Change Usage Mode on the Garmin DriveTrack 70

    If you would like to change the "Usage Mode", please follow these steps From your Home Screen, select "Settings" Select "Usage Mode" You can select between, Prompted, Automobile, or Dog Tracking Prompted - This will automatically switch to Dog Tracking Mode you when it is connected to an Alpha/Astro Device. When your Alpha is turned off, your Drivetrack will automatically...
  8. How to : Pair Your Garmin Alpha 100 with your Fenix 5 Watch

    How to: Pair Your Garmin Alpha 100 with your Fenix 5 Watch This entry was posted on January 18, 2018 by Jason Duby. Purchase the Garmin Fenix 5 Watch  How do I pair my Alpha 100 with my Fenix watch? First you will need to download the "Dog Tracking" widget from the Garmin “Connect IQ” store.  You can find this in your Garmin Connect Application under...
  9. How to: Pair a DC50 With an Alpha 100 Handheld

    Purchase the Alpha 100 Combo How do I add a DC50 to my Alpha 100 handheld? Make sure that the DC50 you are attempting to add to the Alpha 100 handheld has been updated to the latest software version. Failure to do so will result in a failed attempt to add the collar to the dog list. The software...
  10. How do I Pair my Alpha 100 to my DriveTrack70?

    First you will want to make sure that all other handhelds surrounding you are turned off. This will assure that your DriveTrack70 will pair with your unit and not with another hunter's. From your home screen, select Setup Select Dogs Verify that the Dog Broadcasting is turned “on” (if it says dog broadcasting is “off” simply select “dog broadcasting” then...

Items 1 to 10 of 16 total

Page