Double U Hunting Supply

  1. How to: Find landowner information on a Drivetrack 70/71 using a Garmin Huntview Plus Map

    How to: Find landowner information on a Drivetrack 70/71 using a Garmin Huntview Plus Map
    From your map page tap the screen on the parcel you'd like to find information for. You may need to zoom in close enough to see the black lines showing property boundaries. Tap the screen twice. This will bring up a flag on the page. If you look near the bottom of the screen a new toolbar will appear with...
  2. How to: Pair or un-pair a Drivetrack 70/71

    How to: Pair or un-pair a Drivetrack 70/71
    From your Main Screen tap "Dogs" . You will notice there is no green check mark on Dogs because no handheld is paired to the Drivetrack. From the dog list tap the three bars in the upper left hand corner. Then tap "Unpair" This will bring up a warning screen. Make sure the handheld you want paired is the only...
  3. How to: Preform a Master Reset on Drivetrack 70/71

    How to: Preform a Master Reset on Drivetrack 70/71
    From your Main Screen tap "Volume" Hold your finger on the upper right hand corner of the screen for at least 10 seconds. This will bring up a diagnostics page. Then tap "Clear all user data" Then you will need to tap "Yes". You will lose all your saved places but will restore your Drivetrack to factory settings.
  4. How to: Update Drivetrack 71 Software Wirelessly

    From your main screen. Tap “Settings” Tap the down arrow Tap “Wireless Networks” Tap “Wi-Fi” Tap “Search for Networks” Tap an available network and type the password for that network. You will get a message asking if you consent to Garmin collecting, using, and sharing your device data. You can choose “Yes or No” Next message will prompt you for...
  5. How to: Calibrate the Compass on the Garmin Pro 550 +

    You will first need to make the rotary dial is set to the "N" position.  -Press the dedicated "Tone" button -Press the lower stimulation button to Calibrate the compass -Follow directions on display and rotate the Pro 550 + in a figure 8 motion Once the compass has successfully calibrated you will see a check mark on the display verifying...
  6. How to: Turn Collar Tracer Lights on and off with the Garmin Pro 550 +

    To turn the Tracer lights of your TT15 or T5 collar you will first need to make sure it has been paired with your Garmin Pro 550 +. Both units must be turned on and have connection to each other.  -Using the "Dog Selector" switch (upper switch), select desired collar to turn Tracer lights on or off. -Place "Function" switch...
  7. How to: Turn the Pro 550 + Back-light on

    You can activate the Garmin Pro 550 + Back-lite by simple short pressing the power button located on the right side of the handheld near the top. (near the base of the antenna).  You can also turn the Back-light off by simply short pressing the power button again.   Note: if you hold down the power button instead of a...
  8. How to:Tone a Collar with the Pro 550 +

    To "tone" a collar you will first need to use the upper selector switch and set it to the desired dog. (Black, Red or Blue selector) Then press the upper dedicated "tone" button to correct selected dog.  
  9. How to Pair a Collar to the Pro 550+

    First you will need to set the rotary dial on top of the unit to "N" or  "neutral" position. Follow the steps below to program your TT15, TT15 mini, T5 or T5 mini to the Pro 550 + -Place upper selector switch in the desired position for the collar you are adding -Press the dedicated "tone" button above upper selector...
  10. Alpha and DriveTrack 71 Pairing issues

    Alpha and DriveTrack 71 Pairing issues
    Garmin has improved the Alpha to DriveTrack pairing process with software updates since the inception of the DriveTrack 71. However, having the Alpha and the DriveTrack fail to pair with each other is still common. This often happens after they become separated from each other, and then for some reason will not pair back up together. Here are a few...

Items 141 to 150 of 227 total

Page